Topa designs and manufactures tie rod hydraulic cylinders for log splitters,
industrial presses, trailers and agricultural equipment.
You can start from small
mixed orders and grow as your business expands.
Topa supplies standard and custom tie rod cylinders for industrial machines, log splitters, trailers and heavy-duty equipment. Choose from the models below or send your drawing for a tailored solution.
Standard double acting tie rod cylinders for pushing and pulling strokes with stable speed and force control.
Tie rod cylinders with front or rear flanges for easy mounting to machine frames and plates.
Rugged tie rod cylinders designed for firewood log splitters with high force and reliable return.
Cylinders matched to agricultural and utility trailers for lifting, steering or stabilizing functions.
Reinforced tie rod cylinders for harsh, high-load industrial and mobile equipment applications.
Tie rod cylinders engineered for higher working pressure ranges with upgraded seals and materials.
HOB series cylinders with dimensions interchangeable with common industrial standards for easy replacement.
Tie-rod cylinders are common in repair shops and OEM lines. When they run under frequent cycles, small issues turn into leaks, downtime, and repeat returns.
Frequent extension/retraction accelerates seal wear and exposes weak rod surface finish or improper gland tolerances.
Incorrect torque spec or uneven tightening causes micro-movement, resulting in end-cap seepage and alignment issues.
Temperature, fluid compatibility, and pressure spikes shorten seal life when the seal set is not matched to real duty conditions.
Small changes in mounting width, pin center distance, or port orientation can cause interference and rework at the site.
Poor plating thickness, weak corrosion protection, or handling damage tears seals and creates repeat leaks.
Incorrect port angle or thread type forces adapters and tight bends, increasing hose stress and failure risk.
If any of these issues look familiar, send us your cylinder drawing or sample photo. We’ll map the real working conditions and propose the right build spec.
Share your duty cycle, pressure, mounting, and environment. We translate real working conditions into a stable tie-rod cylinder build spec.
We identify what causes leakage or early wear, then recommend the right bore/rod/stroke and mounting for your equipment.
We set rod diameter, material, and tightening strategy to prevent loosening, seepage, and alignment drift over time.
We match seal sets to your temperature range, fluid type, and surface finish to extend service intervals and reduce returns.
You get the same performance across orders. We control key dimensions and test each cylinder to reduce rework at your line.
We help you standardize documentation and markings for smooth procurement, assembly, and after-sales tracking.
If you are replacing an existing cylinder, we can match mounting, ports, stroke, and performance—without guessing.
Tell us your application and constraints. We’ll reply with a recommended tie-rod cylinder configuration and a clear next-step plan.
A tie rod hydraulic cylinder is a type of cylinder where high-strength steel tie rods run through the entire length of the cylinder to hold the head and cap tightly to the barrel. This structure provides excellent stability, serviceability and reliability, making tie rod cylinders widely used in industrial equipment, presses, automation machinery and log splitters.
The tie rod design allows the cylinder to be disassembled easily for maintenance and seal replacement, which makes it a preferred choice for applications requiring long service life and predictable maintenance intervals.
A tie rod hydraulic cylinder is built using several precision-machined components that work together to provide stable power, smooth motion and long service life. High-strength tie rods pass through the entire cylinder body and clamp the head and cap tightly against the barrel.
This construction makes the cylinder easy to maintain, as it can be disassembled quickly for seal replacement or internal inspection—an advantage for industrial equipment that requires scheduled service intervals.
Every tie rod hydraulic cylinder from Topa is engineered to provide stable performance, long service life and easy maintenance for industrial machines, agricultural equipment and log splitters.
Reinforced steel tie rods clamp the head and cap securely, providing excellent durability and reliability under continuous duty.
The tie rod structure allows fast disassembly for seal replacement or internal inspection, reducing maintenance downtime.
Available in clevis, flange, foot mount, trunnion and custom configurations to fit a wide range of machines.
Honed cylinder tubes and precision-machined pistons ensure low friction, stable speed and consistent pushing/pulling force.
From compact small-bore cylinders to large heavy-duty units, stroke and bore sizes can be customized for your application.
High-quality seals provide strong leakage resistance and long cycle life, even under frequent operation.
This factory video gives you a direct look at how Topa manufactures tie rod hydraulic cylinders. From CNC machining and thread processing to seal assembly and pressure testing, every cylinder follows strict quality procedures to ensure stable performance and long service life.
Whether you source spare parts or build your own OEM machines, the video helps you understand how we control tolerances, rod hardness, honed tube finish and tie rod strength—all essential factors for reliable tie rod cylinder production.
Choose from standard or custom mounting styles to fit your machine design. These mounting options make installation easy on construction machines, agricultural equipment, trailers and industrial systems.
Allows the cylinder to pivot during motion. Popular for agricultural, log splitter and mobile equipment applications.
Provides stable parallel mounting. Great for presses, compact machinery and industrial applications.
Rigid mounting used where the cylinder body must stay fixed. Ideal for industrial and factory automation equipment.
Supports pivoting or swinging motion. Commonly used on industrial systems and custom OEM machinery.
Bolts directly to machine frames. Available in front, rear or side flange designs for compact installations.
Compact mounting option using threaded end caps. Suitable for smaller tie rod cylinder models and tight spaces.
Topa tie rod hydraulic cylinders power log splitters, compact construction equipment, trailers, agricultural machines and industrial systems. Supply them as spare parts or install them in your OEM equipment.
Tie rod cylinders for loaders, compact excavators, attachments and shop presses. Standard mounting makes replacement fast for repair shops and contractors.
Cylinders for log splitters, small tractors and implements. Flexible sizing helps you cover multiple equipment models with a simple product range.
For presses, factory machines and material-handling systems. We match your existing cylinders so your customers can replace units without redesigning their machines.
Tell us which machines you build or repair — we configure a tie rod cylinder range tailored to your industry.
Topa provides reliable, consistent and fully tested tie rod hydraulic cylinders for OEM manufacturers, repair shops and global distributors. Every cylinder is engineered with strict quality standards and fast service.
All cylinders are produced in our partner factories, providing stable quality and competitive factory pricing.
Rods, pistons, eyes and end caps are processed on CNC equipment for tight tolerances and smooth operation.
Each production line follows ISO quality procedures, ensuring consistent performance for every order.
Fast technical evaluation and quotation help you complete procurement and customer bidding on time.
Tie rod cylinders, welded cylinders, fittings, hoses and valves—everything from one supplier.
Every cylinder is tested before shipment to guarantee stable performance for your machines.
Topa is a hydraulic manufacturer in China focusing on cylinders, fittings and related components. Tie rod hydraulic cylinders are one of our important product lines.
Most of our customers are hydraulic retailers, importers, brand owners, maintenance shops and small OEMs. They need a manufacturer that listens, not one that only accepts very large orders.
We understand their pain points: quality stability, flexible quantity, clear communication and real after-sales support. Our tie rod hydraulic cylinders are designed and produced with these points in mind.
If you want a long-term tie rod hydraulic cylinder partner instead of a one-time deal, let us know.
Explore how Topa manufactures tie rod hydraulic cylinders — from raw materials to CNC machining, assembly, testing and packing. Photos and videos are available for your catalog and website.
Tubes and rods are inspected for hardness, straightness and surface cleanliness before machining.
Ports, threads, grooves and precision surfaces are machined within tight tolerance.
High-strength steel rods are cut and threaded with precision for reliable clamping force.
Rods receive hard chrome coating for wear resistance, corrosion protection and long cycle life.
Seals, piston, rod and end caps are assembled with attention to cleanliness to avoid contamination.
Each cylinder is tightened using calibrated tools to achieve consistent torque values.
Each cylinder is pressure-tested to ensure no internal or external leakage.
Cylinders are coated with anti-rust oil, wrapped securely, and packed on strong pallets.
Need more photos or videos of our tie rod hydraulic cylinder factory for your catalog or website?
This video takes you inside the real production floor where Topa manufactures tie rod hydraulic cylinders. You will see CNC turning, rod machining, honing, thread cutting, piston assembly, tie rod torqueing, seal installation and pressure testing.
These visual materials help your clients understand the quality behind your cylinders — perfect for your website, catalog, or brand presentation.
Most leak and return issues are not “bad luck”. They come from mismatched specs and missing checks. Use this list to reduce downtime and rework.
A larger rod does not automatically mean a stronger cylinder. Real load capacity depends on bore, pressure, mounting, and side-load.
Wrong mounting selection can cause misalignment and end-cap seepage, even if pressure rating is “enough”.
Seals that work at room temperature may fail quickly in high heat, cold starts, or fluid incompatibility.
End-of-stroke impact can damage seals, loosen tie rods, and shorten service life—especially in fast cycles and heavy loads.
Here are some typical cases from distributors and OEM customers who worked with Topa on tie rod hydraulic cylinders.
A North American distributor needed reliable log splitter cylinders with improved sealing and stable lead time. We adjusted seals and rod diameter for their best-selling models.
A trailer manufacturer wanted one cylinder design to cover several models. We created a flexible tie rod cylinder with adjustable stroke and custom mounting.
A repair shop network needed a small cylinder range to replace many old machines. We suggested adjustable stroke and port options to increase compatibility.
Share your situation and we’ll tell you how we helped similar tie rod cylinder customers.
We arrange production around popular models and keep raw materials ready, so your tie rod hydraulic cylinders do not face unnecessary delay.
You share drawing, sample or key sizes. We double-check details before confirming lead time.
Prepared tube and rod stock shorten machining time. Workers follow a standard production sequence.
After pressure testing, cylinders are dried, oiled and packed for sea or air transport.
We share booking and tracking information, and collect your feedback for the next shipment.
Small sample orders can be shipped by air or courier. Ideal when testing cylinders on prototype machines.
Usual production time ranges from 7 to 30 days depending on complexity and quantity.
For urgent breakdown cases, we prioritize small batches if material and capacity allow.
Tell us your expected delivery time and project schedule — we will be honest about what we can do.
Common questions from distributors, importers and machine builders about our tie rod hydraulic cylinders.
Share your drawings, old samples or basic sizes, and we help you turn them into a stable tie rod hydraulic cylinder supply. Our team understands how cylinders really work on log splitters, trailers, presses and agricultural machines, not only on paper.
You get clear communication, realistic lead time and practical suggestions on bore, rod, stroke, mounting and seal selection—so your cylinders match the market you serve, instead of being just another standard catalogue item.